Releases

Every release, its downloads and its checksums are on GitHub Releases. This page is a summary; GitHub is the source of truth for the files.

Next release (not yet released)

Airframe gains six things, each described in the manual with a Coming in the next release aside. Nothing here is in a downloadable build yet.

• Straps & pads stops being soon. The row shows the pad as a spring (stiffness, natural frequency and the frequency above which it isolates), the strap and the strap slots cut in the seat plate, with checks.
• Arm strength as a ranking. The Arms page gains a breaking load at the motor and a comparison against the catalog’s plate frames (about as strong as the 5” Freestyle).
• Standard mounts by name in the designer: + Stack mount (with a 20×20 / 25.5×25.5 / 30.5×30.5 picker) and + Camera cage (with a Nano 14 mm / Micro 19 mm / Full 26 mm picker).
• Ready to cut: inside corners tighter than the cutting bit are flagged on the Frame row, and the Export menu gains a cutting-bit choice, Round inside corners to the bit and a Countersink selected plate’s screw holes (toggle). Exported SVG and DXF files carry per-plate notes and a _COUNTERSINK layer.
• Camera side plates are upright plates in the designer: counted in mass, drawn standing in 3D, laid flat in the export.
• Build sheet export: an HTML page listing every plate, every screw by length and every standoff, an assembly order and a cutting cost range from placeholder rates.

0.3.0

Released 27 September 2026. Release page and downloads.

• The first open-source release of Lothal, under GPL-3.0-or-later.
• Builds for Windows, macOS and Linux.
• Fixed: the pack current label showed 113 A on Windows instead of 112 A.

The builds are not code-signed yet. See Download and install for the one-time warning on each system.